B2B Trade Leads



B2B Trade Leads | Join Now! | Login | About Rude66 | Trade Shows | World Facts | Advanced Search | B2B Trade Leads

Product Trade Leads

  Prev   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21     Next


Transmission Parts Manufacture - Motors

[ $ 11.00]
03-31-2020 04:06 am
IDP has been working with a number of motor manufacturers for a long time. Whether it is a DC motor, a stepping motor or a brushless motor, our experience with various motors allows us to select the most suitable one to pair with the gearbox for the..
Posted by idpproduction


Transmission Parts Manufacture - Stamping Parts

[ $ 11.00]
03-31-2020 04:05 am
After many research trials, IDP found that if the properties of the stamping parts are applied well, they can greatly enhance the performance of the gearbox. As an example, the bottom cover of a gearbox can be made by a stamping plate, which can..
Posted by idpproduction


Transmission Parts - O rings

[ $ 11.00]
03-31-2020 04:05 am
O-rings currently on the market often fail to meet the sealing requirements of IDP, especially with regard to the sealing effect on the rotating shaft. As a result, IDP has developed its own line of well-sealed, wear resistant O-rings to enhance the..
Posted by idpproduction


Transmission Parts Manufacture - Screw and Nut set

[ $ 11.00]
03-31-2020 04:04 am
IDP utilizes special engineering plastics to make low-friction and high strength nuts. We also adjust thread parameters to minimize the gap. The screw nut set we produce can replace most of the applications of ball screws for just a third of the..
Posted by idpproduction


Small Worm Gearbox

[ $ 11.00]
03-31-2020 04:03 am
With more than 30 years of experience in gear motor design, IDP team is committed to designing the best drive system for customers. Our engineers specialize in designing high-efficiency and low-noise gearboxes. In addition to gear accuracy, there..
Posted by idpproduction


Planetary Gear Design and Manufacture

[ $ 11.00]
03-31-2020 04:02 am
With more than 30 years of experience in gear motor design, IDP team is committed to designing the best drive system for customers. Our engineers specialize in designing high-efficiency and low-noise gearboxes. In addition to gear accuracy, there..
Posted by idpproduction


Barcode Reader Plastic Mold

[ $ 11.00]
03-30-2020 01:16 am
Barcode reader molds with both soft TPE and hard PC overmoldings with critical contoured shutoffs to achieve crisp parting lines.   Founded in 1986, Pacmold Taiwan (Mei-li mold Co., Ltd.) specializes in the design and manufacture of plastic..
Posted by meilimoldco


Lighting Fixture Plastic Mold

[ $ 11.00]
03-30-2020 01:16 am
The lighting fixture mold with A-2 polish on contoured and starburst lens surfaces   The mold parts we like to use are DME, INCOE, Husky, Mold Masters, etc., high quality and internationally renowned company brands. Ensuring mold quality and..
Posted by meilimoldco


Baby Bath Tub Mold

[ $ 11.00]
03-30-2020 01:15 am
The mold parts we like to use are DME, INCOE, Husky, Mold Masters, etc., high quality and internationally renowned company brands. Ensuring mold quality and customized service is always our core value. The details of the mold include choice..
Posted by meilimoldco


Office Furniture Plastic Mold

[ $ 11.00]
03-30-2020 01:15 am
Desk organizer set Good office plastics often require high quality surface treatment dies to produce. In addition to the appearance, how to reduce the cost of the mold is also a major problem. Many plastic products used in the office are made of..
Posted by meilimoldco


Dishwasher Rack Plastic Mold

[ $ 11.00]
03-30-2020 01:14 am
Dishwasher Rack plastic mold with Four-drop and quick-change inserts for models with and without posts and side openings.   Due to the high switching frequency of the refrigerator, the storage compartment in the refrigerator must overcome the..
Posted by meilimoldco


Vacuum Cleaner Cover Mold

[ $ 11.00]
03-30-2020 01:13 am
Vacuum cleaner cover molds with slides and lifters. Appearance surfaces are highly polished. Overmold on the clear base requires critical shutoff on contoured surface.   Due to the high switching frequency of the refrigerator, the storage..
Posted by meilimoldco


Gas Assist Mold

[ $ 11.00]
03-30-2020 01:13 am
Gas assist mold with a thick 1 x ½ inch section. How does the plastic finished product withstand the vibration shock of the motor? How does the plastic case protect the board as much as possible when the user drops or bumps? Monochrome is..
Posted by meilimoldco


Power Tool Plastic Mold

[ $ 11.00]
03-30-2020 01:12 am
Garden power housings tool with unique design to prevent core shifting. Ribs have high polish for smooth release.   How does the plastic finished product withstand the vibration shock of the motor? How does the plastic case protect the board..
Posted by meilimoldco


Radiator Covers - Automotive Plastic Mold

[ $ 11.00]
03-30-2020 01:12 am
All of these parts required multiple slides and core pulls.   Automotive parts are rigorously tested. There is no defect in appearance, which is the user's first instinct for the product. Therefore, the polishing process and surface process..
Posted by meilimoldco


Rearview Mirror Mold

[ $ 11.00]
03-30-2020 01:11 am
Rearview Mirror and A/C Controller Mold Automotive Plastic Mold Rearview and A/C controller have multiple lifters and run automatic.   Automotive parts are rigorously tested. There is no defect in appearance, which is the user's first..
Posted by meilimoldco


power off SMS alarm network wifi ethernet Lan

[ $ 50.00]
03-20-2020 08:40 pm
..
Posted by kingpigeon06


Juki DNU 1541S Lockstitch Machine

[ $ 1199.00]
01-31-2020 08:11 pm
Machine Specifications Max. Sewing Speed: 2,500 Stitch per Minute Max. Stitch Length: 9mm (forward / backward) Needle Bar Stroke: 36mm Lift of the Presser Foot by Hand: 9mm Lift of the Presser Foot by..
Posted by Pro Sewing Machine


Bernina 350 Patchwork Edition Sewing and Quilting

[ $ 839.00]
01-31-2020 08:08 pm
General Features: CB hook system 900 Stitch per minute 6.3" Sewing space to the right of the needle Color touch screen LED sewing lights 5.5mm Maximum stitch width 5mm Maximum stitch length 9 Needle positions 3 Manual thread..
Posted by Pro Sewing Machine


Reliable 7100DB Drapery Blindstitch Machine

[ $ 954.00]
01-31-2020 08:05 pm
Designed for DraperyFor drapery workrooms that are sewing medium to heavy fabric, with or without blackout, we recommend the 7100DB. Where productivity, durability and stitch quality are your requirements, the 7100DB will not disappoint. The skip..
Posted by Pro Sewing Machine

  Prev   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21     Next

Rude66 B2B Portal of Importers Exporters, Trade Lead Opportunities, Company Profile and Product Catalogs.